AC220V Charging Pile Smoke Alarm / Switchgear Smoke Detector / Prefabricated Cabin Smoke Detector / Fire Smoke Alarm

AC220VSmoke Alarm for Charging Piles/Switchgear Cabinet Smoke Alarm/Prefabricated Cabin Smoke Detector/Fire Smoke Alarm

I. Overview:

The JTY-GD-HA801-AC photoelectric smoke detector operates based on the principle of sensing smoke particles. It features a unique structural design and photoelectric signal processing technology, providing functions such as dust resistance, insect resistance, and immunity to external light interference, ensuring product stability from the design stage. This product responds well to visible smoke produced by slow smoldering or open flames. It is suitable for smoke monitoring in indoor environments such as residences, shopping malls, hotels, and warehouses.

II. Performance Features:

The JTY-GD-HA801-AC detector is a non-addressable type and operates directly when connected to a DC power supply. During normal operation, the indicator light flashes. When in alarm, the alarm indicator light turns on. The detector has a pair of output contacts that close/open upon alarm. After the smoke clears, it requires power reset/automatic reset. The detector adopts a base-mounted, ceiling-installation method.

1. Power reset/automatic reset optional

2. Infrared photoelectric sensor

3. Intelligent logic control to filter out various false alarms

4. Normally open/normally closed (NO/NC) alarm output, customizable 5A high-capacity relay output

5. Alarm sound level not less than 75dB (Note: customizable, default without sound)

6. Network output/LED indicator for alarm

7. SMT manufacturing process, strong stability

8. Dust-proof, insect-proof, and anti-white light interference design

9. Resistant to radio frequency interference (20V/m～1GHz)

III. Technical Parameters:

1. Operating voltage: AC110-220V

2. Standby current: ≥2mA (DC24V)

3. Alarm current: ≥10mA (DC24V)

4. Alarm indicator: Red LED

5. Sensor: Infrared photoelectric sensor

6. Operating temperature: -10℃～+50℃

7. Environmental humidity: Maximum 95%RH (non-condensing)

8. RF immunity: 10MHz～1GHz 20V/m

9. Alarm output: Normally open/Normally closed

10. Coverage area: For a space height of 6m～12m, the protection area of one detector is 80m² for general protection sites. For a space height below 6m, the protection area is 60m². Specific parameters should comply with the GB 50116 code for design of automatic fire alarm systems. Sensitivity level: Level 1

11. Dimensions: 104 (diameter) * 53mm (height)

All products can be customized, developed, and OEM. Welcome to inquire by phone. www.szhsj119.com

Shenzhen Hongsheng High-Tech Electronics Co., Ltd.

Contact: Chen Cheng (Mr.)

Phone: 【15889370119】 (same number for WeChat)